electronic sensors order form

Dear customer - here you are able to order our high tech sensors. Please fill with precise informations the fields to prevent errors and missunderstandings. Please pay attention - sometimes multiple answers required - sometimes not.




our new Multi-Control Instrument -->
Application:   what data do you need ?
Please click on a kind of data the sensor should give to you. Dependent from precise production the sensors are able to capture more or less precise the fluid and its qualities. So a level sensor is less price then a layer analysis sensor and a easy water in oil switch sensor is less price then a consumption or fading detect sensor.
The water in oil sensor is just a low cost switch with adjustable ratio and is only for indicate the pass through threshold - per example in a water seperator of a diesel truck or yacht or marine vessel.
level          
lot          
mass          
quality          
aging          
fading          
layer analysis          
water in oil          
Application:   mobile or stationary application ?
Should be the sensor in a mobile engine like a vehicle engine or in a airplane or a marine vessel or should it be in a stationary point like a high tension transformer or a power plant ?

mobile          
stationary          

Application:   in what kind of media or fluid ?
The sensors works in different media and fluids. Dependent from fluid we have to put a different processor in the sensor and the sensor stick will have different material. What exactly do you like to capture ?
diesel          
fuel          
cerosin          
cracked oil          
uncracked oil          
fine oil          
hot grease, fried oil          
bio/olive/sunflower          
gaz form fuel          

Application:   Tank HEIGHT inside tank on flange point (in Millimeters) ?
The sensor will be mounted on top of the tank with a flange or winding and the sensor stick will dive in the fluid. So we need to know the length of the stick we have to produce for you. This lenght will be the range of messurement from 0% to 100%. If the sensor stick is too long it do not fit in the tank and if the sensor stick is too short it will not be able to capture the fluid on deep point of the tank.


mm:    
Application:   max level of tank (in Liters) ?
The sensor will allways calculate the height and the level inside tank and you as user are allways able to view both of it. The sensor will calculate the volume by it self what ever the shape form of the tank is but we need one time the maximum level.


Liters:  
Mechanical connection:   (mounting on flange or inside winding) ?
The sensor will be mounted in the tank hull or in a pipe fitting. There are 2 different posibilities to mount the sensor - flange or inside winding. Please choice one of the possibilities.
8 hole flange 52mm          
8 hole flange 82mm          
in winding 1/2 ''          
in winding 1 ''          
in winding 1 1/2 ''         
Electrical connection:   (electric power source) ?
The sensor needs power source. Dependent from place where it is installed different power source connection will be available.
12 Volts          
24 Volts          
42 Volts          
230V/50Hz          
110V/60Hz          
Data port or Display:   (what data port or display do you need) ?
The sensor is able to give out the data in many different types and kinds. You as the user know what kind of data output do you like or need. Please choice one of the possible connections or ports or displays.




Please fill in here extended information depending from port and data type. If you choiced CANBUS please give CAN-Adress and data format, if you choiced RS232 please give data format like 19200,8n1. If you choiced LCD full text message please give the number of lines and rows seperated by a colon. If you choiced a round instrument please give the distance between sensor and instrument (the cabel lenght) in Meters.
locator instrument          
digital instrument          
switch with 2 LEDs          
8 part LED line          
LCD line stripe          
LCD full text          
RS 232 connection          
USB 2.0 connection          
CANBUS          

extended information
 
a bit more information we need:

Sensor used in extended range of temperatur (-60 to +230 Celsius) ?
Shell we deliver the choiced connections or ports or displays ?
Do you need the instrument or display water proofed ?
Do you need the instrument or display salt water proofed ?
If you choiced a round instrument witch size should be (82mm or 52mm) ?
Witch design of the instrument plate do you like (black or white) ?
Do you like a nondirect light on display or instrument ?
Do you like our MULTI-CONTROL instrument (fitted to you application) ?

YES       NO      
YES       NO      
YES       NO      
YES       NO      
82        52      
blk       wit      
YES       NO      
YES       NO      

how many sensors do you need ?   ==>
number of sensors ?

If you're a registered customer please fill only your ID number here and in field eMail your actually eMail and after that press the SEND button: If you're a new customer without ID number you have to pre pay via PAYPAL ® or DIRECT BANKING with your IBAN. If you're a new customer without ID number you have to fill one time all these fields absolute correctly otherwise we are not able to send the ordered products
company name:  
street and number:  
city and citynumber:  
country:  
phone number:  
eMail adress:  
IBAN if direct banking:  
here your PAYPAL account:  

You will receive a eMail on your eMail adress with confirm and
complete price of the ordered products and date of deliver and some more infos.